Air Pressure Switch Setup

Setting up the Air Pressure Switch. Phots are from ZX5.

Par Stuga Engineer

7 étapes

Aucune étape

Sommaire

Accueil 1. Reduce pressure to around 4 Bar on the air service unit where the pressure switch is wired. 2. Find the Input on the service /IO tab 3. Slowly adjust the dial for the pressure switch 4. Watch for the Input to switch 5. Re-adjust the pressure back up to 6Bar 6. Make sure the Alarm is the correct sense 7. Test by removing the air from the machine to see if it produces the 'Air Pressure Low' Alarm

Matériaux & outils nécessaires

Matériaux

Aucun matériel spécifié...

Outils

Aucun outil spécifié...