Voir la source de TB0415 Method to Prevent Loosening of Saw Blade

{{Tuto Details
|Description=<translate>Method to Prevent Loosening of Saw Blade</translate>
|Categories=Maintenance
|Difficulty=Medium
|Duration=30
|Duration-type=minute(s)
|Tags=TB0415, Saw, Blade, Loosening
}}
{{Introduction
|Introduction=<translate>==Problem==
On Z063 the bolt holding the saw blade onto the spindle has regularly been loosening during use.

==Solution==
The M16 bolt will be replaced with a stud and castle nut that can be locked with a cotter pin.

==Tool List==
Drill with Ø5.0 bit

24mm Spanner

C Spanner

= Parts List =
{| class="wikitable" width="748" border="1" cellpadding="8" cellspacing="0"
| width="76" |D0004031B
| width="319" |Saw Washer 3mm
| width="302" |1
|- valign="TOP"
| width="76" |D0015560
| width="319" |Spindle Stud
| width="302" |1
|- valign="TOP"
| width="76" |F0000273
| width="319" |Spirol Pin Ø6 x 30
| width="302" |1
|- valign="TOP"
| width="76" |F0000549
| width="319" |Split Pin 4mm x 32
| width="302" |1
|- valign="TOP"
| width="76" |F0000550
| width="319" |Castle Nut M16x1.5
| width="302" |1
|}</translate>
}}
{{Materials
|ItemList={{ItemList
|Item=Spanner 24mm
}}
}}
{{EPI}}
{{Tuto Step
|Step_Title=<translate>Remove bolt, washer, blade and blade flanges</translate>
|Step_Content=<translate></translate>
|Step_Picture_00=TB0415_Method_to_Prevent_Loosening_of_Saw_Blade_0415_01.jpg
}}
{{Tuto Step
|Step_Title=<translate>Fit Spindle Stud</translate>
|Step_Content=<translate></translate>
|Step_Picture_00=TB0415_Method_to_Prevent_Loosening_of_Saw_Blade_0415_02.jpg
}}
{{Tuto Step
|Step_Title=<translate>Drill Ø5 hole through shaft and stud for roll pin</translate>
|Step_Content=<translate>Position on shaft not important.</translate>
|Step_Picture_00=TB0415_Method_to_Prevent_Loosening_of_Saw_Blade_0415_03.jpg
}}
{{Tuto Step
|Step_Title=<translate>Insert roll pin to lock stud in position</translate>
|Step_Content=<translate></translate>
|Step_Picture_00=TB0415_Method_to_Prevent_Loosening_of_Saw_Blade_0415_04.jpg
}}
{{Tuto Step
|Step_Title=<translate>Re-fit blade and blade flanges</translate>
|Step_Content=<translate></translate>
|Step_Picture_00=TB0415_Method_to_Prevent_Loosening_of_Saw_Blade_0415_05.jpg
}}
{{Tuto Step
|Step_Title=<translate>Fit Washer</translate>
|Step_Content=<translate>Align flats on washer to ensure holes for pin spanner are clear.</translate>
|Step_Picture_00=TB0415_Method_to_Prevent_Loosening_of_Saw_Blade_0415_06.jpg
}}
{{Tuto Step
|Step_Title=<translate>Fit Castle Nut</translate>
|Step_Content=<translate></translate>
|Step_Picture_00=TB0415_Method_to_Prevent_Loosening_of_Saw_Blade_0415_07.jpg
}}
{{Tuto Step
|Step_Title=<translate>Install Cotter Pin</translate>
|Step_Content=<translate>Ensure pin is secure and cannot be dislodged during normal operation.</translate>
|Step_Picture_00=TB0415_Method_to_Prevent_Loosening_of_Saw_Blade_0415_08.jpg
|Step_Picture_01=TB0415_Method_to_Prevent_Loosening_of_Saw_Blade_0415_09.jpg
}}
{{Notes}}
{{PageLang
|Language=en
|SourceLanguage=none
|IsTranslation=0
}}
{{Tuto Status
|Complete=Draft
}}