Voir la source de Notes on Upgrading Saw from pre-v6 to v6

{{Tuto Details
|Description=<translate>Lots of complex problems bringing a pre v6 saw (with beckhoff pre-v6 also) 
Notes to follow if this is needed again</translate>
|Categories=Software
}}
<translate>= Start from Scratch =
Very difficult to get front and back end to talk if the twinCAT versions are different. Update both to 4024

Update front end software to v6

Add to versionControl

= SX / GX Axes =
v6 used GX, older versions sometimes used SX

* Axes.mul (rename to GX and axis is 1)
* Clamps.mul (GX not SX) - copy clamps.mul from S012
* Project link to arrAxes[10]
* Project axis naming

<br /></translate>
{{PageLang
|SourceLanguage=none
|IsTranslation=0
|Language=en
}}
{{AddComments}}
{{Tuto Status
|Complete=Draft
}}