Voir la source de Accuracy Checklist For Operators - Basic

{{Tuto Details
|Description=<translate>Basic Checks that an operator can carry out as a first level identification of accuracy issues</translate>
}}
<translate>
{| class="wikitable"
|+External Factors
!Check
!Description
!Symptoms
!What to do
|-
|Temperature Changes
|Is it winter and the profile stored outside and loaded directly on the machine?


Has pr
|Position of operations on pieces. 
Seemingly random but will be worse on first pieces off the saw.
|A bar of plastic will expand by 12mm in length with a 10 degree change in temperature. 
Try your machine with profile that has been indoors and is the same temperature as the machine environment
|-
|Profile Width
|Check the profile width with a Vernier gauge - is it the width it is supposed to be
See [[Z Transom Width Measurement]] for measuring Z Transom Width
|V and Y notch Depth
Arrow Head Position
|Adjust the profile width in the settings - this will adjust the depth of V and Y notches to match the profile width{{Warning|...be sure to reset it once the problem profile is used up}}<br />
|-
|Profile Symmetry
|T and Z profiles are not extruded symmetrically
|Arrow Head Position poor on one profile but not on others
|Check symmetry of profile carefully .
See [[TM016 Arrow Head Adjustment on Saw]] for further details
|-
|
|
|
|
|}


[https://stuga.dokit.app/wiki/Accuracy_Checklist_For_Operators_and_Maintenance_Staff_-_Advanced For advanced checks please click here]</translate>
{{PageLang
|Language=en
|SourceLanguage=none
|IsTranslation=0
}}
{{AddComments}}
{{Tuto Status
|Complete=Draft
}}