Voir la source de Upgrade Flowline Opto Sensors to Ultrasonic

{{Tuto Details
|Main_Picture=Upgrade_Flowline_Opto_Sensors_to_Ultrasonic_IMG_0130_-_Copy.jpg
|Description=<translate>Upgrading the 3 off opto sensors on a flowline Mk3 infeed table to ultrasonic version</translate>
|Difficulty=Medium
|Duration=2
|Duration-type=hour(s)
|Tags=flowline, ultrasonic, infeed, sensor, upgrade
}}
{{Introduction
|Introduction=<translate>With the development of full colour ranges for profiles, the older flowline opto sensors often have trouble "seeing" the darker profiles. An upgrade kit is available (R0019014) to replace the optical sensors with an ultrasonic version</translate>
}}
{{Materials}}
{{Tuto Step
|Step_Title=<translate>Kit of Parts</translate>
|Step_Content=<translate></translate>
|Step_Picture_00=Upgrade_Flowline_Opto_Sensors_to_Ultrasonic_Flowline_Ultrasonic_2.jpg
}}
{{Tuto Step
|Step_Title=<translate>Mechanical Fitting</translate>
|Step_Content=<translate></translate>
|Step_Picture_00=Upgrade_Flowline_Opto_Sensors_to_Ultrasonic_Flowline_Ultrasonic_1_-_Copy.jpg
|Step_Picture_01=Upgrade_Flowline_Opto_Sensors_to_Ultrasonic_IMG_4469.JPG
|Step_Picture_02=Upgrade_Flowline_Opto_Sensors_to_Ultrasonic_IMG_4476.JPG
}}
{{Tuto Step
|Step_Title=<translate>Wiring</translate>
|Step_Content=<translate>The sensor wiring directly replaces the 3 other sensors</translate>
|Step_Picture_00=Upgrade_Flowline_Opto_Sensors_to_Ultrasonic_IMG_4473.JPG
|Step_Picture_01=Upgrade_Flowline_Opto_Sensors_to_Ultrasonic_IMG_4474.JPG
}}
{{Tuto Step
|Step_Title=<translate>Blower</translate>
|Step_Content=<translate>The blower should Tee in to the blower already there for the other offcut measurement sensors</translate>
|Step_Picture_00=Upgrade_Flowline_Opto_Sensors_to_Ultrasonic_IMG_4478.JPG
|Step_Picture_01=Upgrade_Flowline_Opto_Sensors_to_Ultrasonic_IMG_4479.JPG
}}
{{Notes}}
{{PageLang
|Language=en
|SourceLanguage=none
|IsTranslation=0
}}
{{Tuto Status
|Complete=Draft
}}