Voir la source de ACEpc Network Software - IP

{{Tuto Details
|Description=<translate>Setting up a ACEpc with the NETSETGO software to interface with an ip address to a windows Xp or earlier computer.</translate>
|Difficulty=Easy
|Duration=10
|Duration-type=minute(s)
}}
{{Introduction
|Introduction=<translate></translate>
}}
{{Materials
|Prerequisites={{Prerequisites
|Prerequisites=ACE PC Re-Flash
}}
}}
{{Tuto Step
|Step_Title=<translate>Insert disk (Power off)</translate>
|Step_Content=<translate></translate>
}}
{{Tuto Step
|Step_Title=<translate>Power On</translate>
|Step_Content=<translate></translate>
}}
{{Tuto Step
|Step_Title=<translate>Proceed with format Y</translate>
|Step_Content=<translate>Volume label [enter]


This will format the hard drive and then copy all necessary network software as a ZIP file to the hard drive and then inflate it.</translate>
}}
{{Tuto Step
|Step_Title=<translate>NetEdit Saw Name</translate>
|Step_Content=<translate>Build number must be unique. If a flowline saw put an "s" on the end. i.e. F073S</translate>
}}
{{Tuto Step
|Step_Title=<translate>Saw IP address</translate>
|Step_Content=<translate>Supplied by customer. 


If testing in house it  needs to be on the 192.168.16.xxx range.


e.g 192.168.16.101

<br /></translate>
}}
{{Tuto Step
|Step_Title=<translate>Multi Name</translate>
|Step_Content=<translate>If this is for a Flowline - Build Number of Flowline machining center


Otherwise this will be the net NETBEUI name of the pc you are connecting to.


For testing at stuga this will be NAS1?</translate>
}}
{{Tuto Step
|Step_Title=<translate>Multi IP</translate>
|Step_Content=<translate>If this is for a Flowline - IP Address of Flowline machining center

Otherwise this will be the IP address of the pc you are connecting to.

For testing at stuga this will be 192.168.16.6?</translate>
}}
{{Tuto Step
|Step_Title=<translate>Save + Exit</translate>
|Step_Content=<translate>Press escape - then Y


Unable to open params.saw file is normal.</translate>
}}
{{Tuto Step
|Step_Title=<translate>Remove Disk + Reboot</translate>
|Step_Content=<translate></translate>
}}
{{Notes}}
{{PageLang
|Language=en
|SourceLanguage=none
|IsTranslation=0
}}
{{Tuto Status
|Complete=Draft
}}